BaByliss 7785U, Руководство пользователя

Страница: 5 / 12

Warning: If the LED display shows the words ‘Hi’ or ‘Low’, immediately
check if the adaptor mentions the reference ‘CA78’. If the ‘Er’ symbol
is displayed on the screen,stop charging immediately and contact our
Customer Care Centre for further advise (see the ‘After Sales Service’
section of the information booklet).
Mains Operation
• Ensure the appliance is switched off.
• Connect the adaptor to the base of the appliance and plug the
adaptor into a suitable mains socket.
• The appliance is now ready for use.
• NOTE: The appliance should not be used for longer than 20 minutes
when operated from the mains.
Cordless Operation
• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch on. The LED screen will then display the
autonomy and the symbol ‘ ’ will begin to flash, indicating that the
unit is charging.
• Fully charged, the appliance can be used for at least 160 minutes.
• When LED display has less than 5 minutes left, the time symbol ‘
’ indication will change to red and flash. warning you there is
approximately 5 minutes left of battery use remaining.
LOCKING AND UNLOCKING THE APPLIANCE
To lock the appliance, keep the switch pressed until the 3-sec ond
countdown is fully lit. The symbol will then flash, in dicating that the
appliance is locked.
To unlock the appliance, keep the switch pressed until the 3-second
countdown is fully lit. The appliance is switched on and the LED screen
displays the height of the tuning thumb wheel.