BaByliss PRO Titanium Foil Shaver, Руководство пользователя

Страница: 5 / 9

Shaving
• The shaver is designed for a close cut on hair shorter than 1/32".
If hair is longer, use a trimmer to shorten the hair prior to using the
shaver.
• Remove the protective cover and turn the shaver on using the switch
on the side of the unit.
• Hold at a right angle and move the shaver slowly and smoothly
against the grain of your beard.
• Short, circular strokes will help to make the hairs stand out and make
shaving easier.
• The foils should glide over the skin. Ensure not to apply too much
pressure or this may cause damage to the foils.
• Turn the unit off using the switch on the side of the unit.
• Thoroughly clean the hair from the foils and the cutting blade to
ensure shaving comfort during next use.
CLEANING & MAINTENANCE
• To maintain optimum performance, the appliance should be cleaned
after each use.
• Never press on the cutting blades or the shaving foil as this can
cause irreparable damage.
• Blow any remaining hair from the foils and cutting blades or use the
cleaning brush provided.
• Ensure that no water gets inside the unit to avoid damaging
the shaver.
• When cleaning, do not apply any detergents and do not use any
abrasive or sharp objects. They can cause irreparable damage to the
shaver.
• To clean the external surface of the shaver, use a damp cloth. Do
not use strong detergents or other chemicals.
• To dry, wipe the surface of the shaver with a dry towel.
REMOVE & REPLACE THE FOIL HEAD ASSEMBLY
• Remove the foil head assembly by pressing the round release button
located on the side of the shaver. Hold the foil head assembly on
both sides and lightly pull away from shaver unit.
• Align the replacement foil head assembly over the cutters. Carefully
move the replacement foil head assembly down towards the shaver
unit until it firmly snaps into place.
CAUTION! Be careful not to damage the foils or cutter blades whilst
installing.
REMOVE & REPLACE THE CUTTER BLADES
• To remove cutters, place your fingers on each side and gently pull up
and away from the drive shaft.
• To replace cutters, align cutter above the drive shaft and lightly push
down until it snaps into place.
• Replace the foil head assembly, turn shaver on to ensure it is
working properly.
TECHNICAL DATA
Vibration and noise levels
Adaptor CA78M
Vibrations < 2.5 m/s²
LpA (dB(A)) < 70
UK GUARANTEE
This BaByliss PRO appliance is guaranteed for professional use for 2
years and is only valid within the United Kingdom.
Exclusions
This guarantee will no longer be valid meaning that The Conair Group
Ltd will not be liable to repair or replace your product where:
1.) The appliance has been used on a voltage supply other than that
which is marked on the product, or advised within this instruction
booklet.
2.) The appliance has been purchased from an unauthorised stockist*.
3.)
Repairs or alterations have been attempted by unauthorised
persons.