6
7
BATTERY (MODEL FXBPC) INDICATORS
Critically Low Battery – Red Flashing Light
Low Battery – Blue Flashing Light
Unit On and Battery Fully Charged – Blue Light
Error – Red Flashing Light
(more than 4 flashes/second)
WARNING
– Make sure battery tabs and
slots on the sides of the unit are lined up
before pushing battery all the way in. Do
not force battery in if any resistance is felt.
ADJUSTABLE TAPER LEVER
The taper lever is positioned at your thumb.
You can hold the clipper in your hand and
adjust the lever at the same time – while
you are clipping.
The taper lever adjusts the closeness of the
cut from a close cut with the taper lever
in the up position, to a longer length cut
with the taper lever in the down position.
To increase cutting length, slowly push
the lever down. To cut closer, push the
lever up. As different cutting edges are
used in each setting, using the taper lever
lengthens the life of the clipper blades.
Too much hair can slow down hair clippers.
Keep the clipper on for removing hair. Then
push the taper lever back and forth quickly
for several times. If you do this every
time, especially after much hair cutting,
the clipper blades should remain free of
cut hair. Oil the blades after the above
procedures.
HAIR POCKET DOOR
The top housing of the B890A clipper has
a removable, magnetic door integrated into
the top housing, allowing for easy access to
and cleaning of critical moving parts.
To remove the magnetic door, place fingers
on the side tabs and pull straight away from
the unit.
To clean internal moving parts, use
compressed air or the included small
cleaning brush to clear out hair from the
housing after the magnetic door has been
removed.
Close Cut
Longer Cut
Once finished with cleaning the moving
parts of the clipper unit, carefully place the
magnetic door back in its proper position.
The magnets should pull the door back into
place.
BATTERY REMOVAL AND INSTALLATION
The B890A clipper features removable and
rechargeable batteries, so you can cut and
style for extended amounts of time with
minimal interruption.
Make sure the clipper switch is in
the OFF position before removing or
installing battery.
To remove the battery, press on the two
tabs toward the bottom of the unit and pull
the battery out of the bottom of the unit.
Then place into charging stand.
To install a new battery, line up the tabs
of the charged battery with the slots on
the sides of the unit and slide up into the
housing, pressing firmly until battery clicks
into place.
Taper control
Charging stand
and batteries
ON/OFF switch
(ON marked "", OFF marked " ")
B890A PRODUCT FEATURES
High-Torque, 6800 RPM, Brushless Motor
Two Lithium Interchangeable Batteries
Dual Battery Charging Stand
Magnetic, Removable Hair Pocket Door
LED Ring Light Battery Indicator
All-Metal Housing / Knurled Barbell Grip
Black DLC Fade Blade; Zero-Gap Adjustable
5-Detent Locking Taper Control
Detent Hanging Hook
8 Premium Clipper Guards with Metal Clips
8 premium clipper guards with metal clips
Cleaning
brush
Lubricating
oil
