IMPORTANT
: please note when using the trimmer without the comb
guide, the cutting length will be below 0.4mm. The length setting
shown on the LCD screen will no longer be relevant when the comb
guide is detached.
i-Stubble3 Top Tips
• Use on clean, dry hair.
• If possible, when using for the first time, try and grow your facial hair
for a few days before cutting so you can trim down to a level that is
best for you.
• Set the cutting length as required.
• It is always best to start cutting with a longer length first, then trim
again if the length is longer than desired.
• Hold the i-Stubble3 against the hair, the teeth of the comb guide
should be pointing upwards and should be flat against the face.
• Move the trimmer upwards through the hair, a little at a time, against
the direction of hair growth. The floating and contouring head will
follow the curves of your face to ensure both accuracy and comfort.
• The i-Stubble3 will work most effectively when cutting through the hair
at its own speed – never force through the hair. You may experience
a little resistance when trimming the neck area, where hair is thicker
and grows in many different directions. This is completely normal.
• Just like shaving, extra time should be given when trimming under
the neck area, as again this is where hairs grow in many different
directions.
• Never switch the trimmer off whilst in the hair.
CLEANING & MAINTENANCE
• Regular cleaning will maintain the high performance of your i-Stubble3.
• Switch off and remove the power cord if connected.
• Detach the comb guide by gently lifting the front of the comb guide
from both sides and flipping it over to the back of the unit and locking
it into position by clicking it securely onto the fastener on the back
of the handle.
• Use the cleaning brush supplied to brush away any hair and debris.
