BaByliss for MEN 7452BU, Руководство пользователя

Страница: 5 / 12

• To attach a comb guide, ensure the appliance is switched off. Slide
the cutting blades of the clipper under the slot in the rear of the teeth
of the cutter guide and snap the clip on the bottom of the guide over
the bottom edge of the fixed clipper blade.
• To remove the comb guide, ensure the appliance is switched off.
Push the tab on the rear of the comb guide away from the head and
lift off.
Taper Control
The taper control with 5-position lever enables fine cut adjustment for
precision clipping.
• To increase the cutting length, push the lever down.
• To reduce the cutting length, push the lever up.
Preparation for Use
• Always inspect the appliance before use to ensure the clipper blades
are free from hair, debris etc.
• For best performance, use on clean, dry hair that has been combed
until tangle-free.
Clipping
For an all over even cut:
• Attach a comb guide as required - your clipper is supplied with 6
comb guides (grades 1,2,3,4,6,8). Each comb guide is labelled.
• Switch the clipper on and the blades will start to move.
• Starting at the nape of the neck, hold the clipper with the teeth of the
clipper pointing upwards, ensuring that the comb guide is resting flat
against the head.
• Slowly move the clipper upwards and outwards through the hair
towards your crown, against the direction of the hair growth. The
comb guide will help to lift the hair and the blades will cut the hair at
the desired length.
• Once the desired length is achieved at the back of the hair, start
clipping the top and sides.
• Hold the clipper to the front of your hair with the teeth pointing
7452BU new.indd 5 3/20/17 5:55 PM