background image

Care:

•  Regularly check the tightness of bolts and tighten as necessary
•  Check for damage which could render your cot or cot bed unsafe or cause splinters
•  To clean, use a soft cloth, avoiding the use of strong detergents or abrasives
•  An occasional light application of a wax polish will help maintain a good appearance

Safety Warning:

•  Be aware of the risk of open  re and other sources of strong heat in the near vicinity of the child’s cot or bed
•  Do not use the child’s cot or bed if any part is broken, torn or missing
•  Do not leave anything in the cot that could present a danger of suffocation or strangulation  
•  Do not use more than one mattress in the cot
•  In cot mode 3 base height positions are possible. The lowest position is the safest and should always be used as 
  soon as baby is old enough to sit up
•  While at the lowest base position, ensure that the  surface of the mattress and the upper edge of the cot frame 
  are at least 50 cm apart
•   While at highest base position, ensure that the  surface of the mattress and the upper edge of the cot frame are 
  at least 20 cm apart
•  The cot bed is suitable for a mattress of 140 cm in length and 70 cm in width
•  To prevent injury from falling, when the child is able to climb out of the cot, the cot should no longer be used for 
  that child. The cot should be converted to a bed
•  The safety of the cot could be adversely affected by  tting  ammable drapes
•  The cot should be placed either tight to any wall or have a gap of 30 cm between the wall and the side of the bed
•  The bed should be carefully dismantled for storage or transportation

Made in PRC

Imported & Marketed By

Brainbees Solutions Pvt. Ltd.
Corporate & Registered Office Address:
Rajashree Business Park, Plot No: 114,
Survey No. 338, Tadiwala Road,
Near Sohrab Hall, Pune 411 001

Customer Care :

     020-30556310
     [email protected]

Содержание Merlino Cot Bed






Отзывы: