gure 5
1a
3
1b
gure 4
Bed Mode
Step 1:
Dismantle the cot bed carefully and place
all parts to one side. Separate the upper
and lower parts of both head and foot
boards as shown in gure 4 (Note: Any part
not used for bed mode would be needed
for other modes when converting. So store
all parts safely)
1b
1a
1a
1b
Step 2:
As shown in gure 5, insert two barrel nuts
with plastic washers into the holes in one
corner of the base and align the slots with
the bolts. Once aligned, screw the bolts
into the barrel nuts, but do not fully
tighten at this stage.
Step 3:
Repeat above steps for the other corners
and fully tighten all the bolts.
