background image

2

3

Always read and follow assembly instructions for each product use mode 

(bedside sleeper, bassinet, play yard/non-full-size crib).

Always use ALL required parts for each use mode. Check instruction manual 

for a list of required parts. Periodically check product for loose, damaged, or 

missing parts.

Always use attachment system when using in Bedside Sleeper Mode.

WARNING:

 

STRANGULATION HAZARD:

 When 

Resistance Plate system is not in use, store in a safe place not accessible to 

children. 

WARNING:

 To avoid death from the infant’s neck being 

caught on the top rail on the side that is next to the adult bed, the top rail 

must be no higher than the adult bed mattress. 

DO NOT

 use bedside sleeper if any parts are missing, damaged, or broken. 

Contact babybay for replacement parts and instructional literature if needed. 

DO NOT

 substitute parts.

Do not place the babybay near a space heater, open fire or other source of 

strong heat.

Always read and follow assembly instructions for each product use mode 

(bedside sleeper, bassinet, play yard, crib).

Assemble product according to manufacturer’s instructions for ANY use 

mode—bedside sleeper as well as the bassinet or play yard modes, or both.

ACCEPTABLE BED FRAME IN-LINE

Mattress, Boxsprings & Frame aligned

Frame Extended

UNACCEPTABLE BED

MATTRESS, BOXSPRING & FRAM E NOT IN-LINE

WARNING:

 

READ ALL INSTRUCTIONS BEFORE 

ASSEMBLING AND USING THE PRODUCT. ALWAYS READ AND FOLLOW 

ASSEMBLY INSTRUCTIONS FOR EACH PRODUCT USE MODE (BEDSIDE 

SLEEPER, BASSINET, PLAY YARD/CRIB). 

Please read additional warning label sound on the sleeping platform 

of the babybay

®

 bedside sleeper (see diagram below).

WARNING LABEL ON 

SLEEPING PLATFORM

WARNING: 

FAILURE TO FOLLOW THESE WARNINGS 

AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

 

SUFFOCATION HAZARD

 Discard all packing materials immediately after 

opening. Plastic bags and ties may cause suffocation or choking.

BEDSIDE SLEEPER WARNINGS

A bedside sleeper is designed to provide a sleeping area for an infant until he 

or she begins to push up on hands and knees or approximately 5 months of 

age. Move your child to another sleeping product when your child reaches this 

stage.

ENTRAPMENT HAZARD

—To prevent death from entrapment, the bedside 

sleeper must be properly secured to an adult bed using the attachment 

system.

(1) There must be no more than 1⁄2 in. (13 mm) gap between bedside sleeper 

and adult bed.

(2) Check tightness before each use by pulling bedside sleeper in a direction 

away from adult bed.

(3) If gap exceeds 1⁄2 in. (13 mm), 

DO NOT

 use product. 

DO NOT

 fill the gap 

with pillows, blankets or other items that are suffocation hazards.

Содержание ORIGINAL










Отзывы: