DD
DD
(DD) 1/4"Ø x 1/2 IN. BOLT (x4 PIECES)
ALLEN WRENCH
HARDWARE FOR STEP #4
Page 9 of 9
STEP #4
TODDLER RAIL ASSEMBLY
STEP #4.1:
Gently tilt the crib and release the bolts underneath
the metal brackets holding the Stabilizer Rails.
NOTE
• When converting to toddler bed, loosen all the bolts
and nuts that connect the End Panel and Stationary
Side Rail. Please see DETAIL H.
• If mattress support is not in the lowest position,
unscrew mattress support bolts and move to the
lowest position.
STEP #4.2
Repeat procedures from STEPS #1.3 - 1.4, substituting
one Stationary Side Rail with a Toddler Rail.
Please see DETAIL H.
NOTE:
Fill the top holes on both End Panels with bolts (E)
provided as in DETAIL I.
STEP #4.3
Repeat step #3. Installation of stabilizer rails into the
end rail panel as in detail (DETAIL J)
After assembly, re-tighten all bolts to a snug fit.
Thank you for your purchase
www.rhbabyandchild.com
DETAIL H
DETAIL J
DETAIL I
