CONTENTS (Fig. 1-1):
1 Playard
1 Mattress
1 Travel or storage bag
4 Leg extensions
BEFORE YOU BEGIN:
The Baby Trend Playard is designed so that,
when properly setup, the fabric of the playard places pressure on the 4
top rails making them nearly impossible to unlock. This safety feature
is activated when you push down on the playard fl oor to lock the bottom
rails. When setting up the playard, if you allow the bottom rails to lock
before locking the top rails, the fabric pressure will not allow you to lock
the top rails. Please see (Fig. 4.) for the proper position of the bottom of
the playard when locking the top rails.
1. Unzip bag and remove Playard frame (Fig. 1). Undo the 3 hook and
loop straps and set mattress aside (Fig. 2). Turn the playard upside
down. Push each leg extension into the bottom of the leg until both
sides of extension snap into place (Fig. 3). Check that the extension is
fi rmly connected
* READ IMPORTANT: In order to continue, the handle in the center
of the fl oor of the Playard MUST remain raised in order for the
rail to lock (approx. 45.7 cm or 18 inches). The feet of the playard
should almost touch each other. All 4 bottom rails must be pointed
upward in order to LOCK top rails.
2. Push down on center of Playard fl oor until it is fl at and locks into
position (Fig. 5). The center lock mechanism will lock automatically.
NOTE: Test rails to make sure they are locked. Push down on each
rail making sure they are rigid and in a set position.
WARNING:
All top rails MUST be
straight and locked in position or child may
become entrapped and suffocate.
See fi gure 6 and 7.
Figure 3.
Figure 6.
FOR THE SAFETY OF YOUR CHILD, PLEASE READ THE INSTRUCTIONS COMPLETELY
BEFORE ASSEMBLING THE PLAYARD.
TO ASSEMBLE PLAYARD
Figure 2.
3
Figure 5.
Figure 7.
Figure 1.
Leg extensions
Figure 4.
2-Left
2-Right
