SEATBACK POSITIONING
• The seat has a multiple position recline that is controlled
by a cord and spring
loaded adjuster behind the seat.
To recline the seat,
pull back on the adjuster while
holding the 2 cords. See figure 13. To place the seat back in a more upright position,
grab the adjuster with one hand and pull the loop to the desired position with the
other hand. See figure 14. The cord will lock automatically.
The upright position should be used only for a child that is at least 6 months
old. Always re-adjust the safety harness, including the shoulder belts, when
repositioning the seatback.
BRAKES
WARNING:
Always set brakes when the
stroller is not being pushed so that the stroller will not
roll away. Never leave stroller unattended on a hill or
incline as the stroller may slide down the hill.
• To engage brakes, apply light downward pressure to the brake lever located on
each rear wheel. The stroller may require slight forward or rearward movement
in order to line up the teeth on the brake with each wheel brake cluster. See
figure 15. Check that the stroller will not move and that both brakes are properly
applied. To release, gently lift up on the brake lever.
CANOPY
• The canopy features a ratchet system that allows the canopy to be moved forward
or back to block the sun or wind. To adjust the canopyʼs position, push forward
or backward on the canopy until the canopy is in the desired position. See figure
16
.
Figure 13.
Figure 14.
Figure 15.
6
Figure 16.
