Baby Lock Solaris BLSAU, Инструкция и справочник

Страница: 8 / 17

Embroidery
7
n
Press to unlock all keys and buttons.
o
Thread the machine with the upper thread.
p
Press the "Presser Foot Lifter" button twice
to raise the presser foot and then attach the
embroidery frame to the embroidery unit.
■
Embroidering a Couching Pattern
a
Press .
b
Make sure that about 20 cm (8 inches) of
yarn is pulled to the front of the machine.
c
While holding the yarn in your hand in
front of you, press the “Start/Stop” button.
d
After embroidering several stitches, release
the yarn.

When embroidering is finished, the machine will
automatically trim the threads and stop.
e
Cut the yarn, leaving about 20 cm
(8 inches).
f
Punch a hole through the fabric with an awl
or tapestry needle and then use the yarn
threader to pull the excess yarn to the
wrong side of the fabric.
g
Tie the end of the yarn so it cannot be
pulled out, and then use scissors to cut off
any excess yarn.
Note
• Do not use the spool stand for upper
thread. Otherwise thread may tangle with
yarn.
Memo
• For best results, use an upper thread that is
the same color as the yarn.
CAUTION
• Pulling the yarn upwards may cause it to catch
on the needle, causing it to break. Be careful
not to allow the yarn to catch on the needle.
Note
• Before embroidering, make sure that there
is enough yarn, upper thread and bobbin
thread.
• Make sure that the yarn passes smoothly
through the guides. Unravel as much yarn
from the ball as necessary so that the yarn
does not become taut.
• Use yarn that has no knots.
Memo
• When using a high-density yarn, the upper
thread tension may be disturbed. If this
happens, it is possible to improve it by
raising the "Embroidery Foot Height" by
about 1 mm on the settings screen.