Baby Lock Model BLCS, Инструкция по эксплуатации

Страница: 35 / 44

S
P
E
C
I
A
L
T
Y
T
H
R
E
A
D
S
33
1. Open the front cover and raise the presser foot.
2. At the threading port, cut the chain looper thread. Remove
chain looper thread from under the presser foot and the
upper thread guides. Replace cone of thread with specialty
thread.
3. Place the machine in "locked" position to thread the chain
looper.
4. Thread specialty thread into the upper thread guides, leav-
ing an 18-inch (40cm) tail above the threading port.
5. Place the straight end of the looper threading tool into the
threading port. Push the looper threading tool until the
end comes out of the looper eye. Open side door of machine
to see threading tool come out of the eye of chain looper.
6. Insert the specialty thread tail into the looper threading
tool eye (fig.A). Pull the straight end of the looper thread-
ing tool through the looper eye bringing the specialty
thread with it. (fig.B)
7. Cut chain looper thread to 4 inches (10cm) and place in
tray. Close the side door of the machine.
Looper Threading Tool
A
B