Baby Lock imagine wave BLE3ATW, Руководство по обслуживанию

Страница: 18 / 18

10. TROUBLE SHOOTING
10-1 NEEDLE THREADS ARE UNBALANCED ;
* Is the serger threaded correctly? See Quick Reference Guide
* Are the threads snapped in the head guide? See Instruction Book P.12
* Is the stitch selector positioned correctly? See Quick Reference Guide
* Is the looper thread fine-tuning screw positioned correctly?
See Instruction Book P.13
* Are the threads recommended high quality? See Instruction Book P.7
* Is the needle thread sensor cable positioned correctly?
See P7, 3-6
* Is the needle thread sensor cable adjusted correctly? See P9, 4
10-2 LOOPER THREADS ARE UNBALANCED ;
* Is the serger threaded correctly? See Quick Reference Guide
* Are the threads snapped in the head guide? See Instruction Book P.12
* Is the stitch selector positioned correctly? See Quick Reference Guide
* Is the looper thread fine-tuning screw positioned correctly?
See Instruction Book P.13
* Are the threads recommended high quality? See Instruction Book P.7
* Is the serger threaded correctly? See Quick Reference Guide
* Are the threads snapped in the head guide? See Instruction Book P.12
* Is the stitch selector positioned correctly? See Quick Reference Guide
* Is the looper thread fine-tuning screw positioned correctly?
See Instruction Book P.13
* Are the threads recommended high quality? See Instruction Book P.7
* Is the looper thread sensor cable positioned correctly? See P7, 3-6
* Is the looper thread sensor cable adjusted correctly? See P9, 4
10-3 THREAD BREAKS ;
10-4 NEEDLE THREADER WORKS IMPROPERLY ;
* Are the needles inserted until the end of clamp holder? See P11, 5
* Is the height of each needle correct? See P 2
* Is the adjustment of needle threader correct? See P11, 5
10-5 JET AIR THREADER DOES NOT WORK
*Is air deflated from pump? See P13, 7
*Are pipes connected properly? See P13, 6
*Are there any lints or thread in pipes?
10-6 WAVE STITCH IS NOT FORMED;
*Is the machine threaded correctly? See Quick Reference Guide
*Is the machine set for 3-Thread Wave stitching? See Instruction Book P.33
*Is the Wave Selector shows "W" ? See Instruction Book P.33
7
17
*For Rolled Wave Edging, is the stitch length dial set for "ROLLED HEM" ? See Instruction Book P.35
*Is the Stitch Selector set correctly? Set the Stitch Selector at "B" for 3-Thread Wave Stitch
or "C" for 3-Thread Rolled Wave Stitch. See Instruction Book P.34,35