Baby Lock Celebrate BLS1, Инструкция и справочник

Страница: 47 / 52

M
A
I
T
E
N
A
N
C
E
44
Cleaning
Replacing LED Light Bulb
Your Baby Lock will operate at best performance if it is kept clean at all times. The serger's
cutting action creates much more lint than you will find on conventional sewing machines. This
lint impedes the machine's efficiency and acts as a sponge to draw oil from it.
Your serger will not need oiling for many years because the major moving parts are made from
oil-impregnated metal.
However, we recommend using the cleaning brush often during garment construction in order to
keep lint off the blades, the needle bar, the feed dog mechanism and loopers. Remove the blade
cover and throat plate periodically to clean more thoroughly.
TO REMOVE NEEDLE PLATE, PROCEED AS FOLLOW:
1. For safety reasons, unplug main power cord.
2. Raise and remove presser foot.
3. Select stitch length dial to rolled hem setting.
4. Remove needles from needle clamp.
5. Turn your handwheel until the upper looper is in the far right position.
6. Remove the needle plate. Remove front screw with screwdriver and back screw with allen
wrench. (fig. A)
7. With your right hand, first raise the needle plate in front of the blade. Pull slightly to the right,
then remove to the left.
8. Replace in reverse procedure.
9. Finally, position the needle plate so that the needles lower in the center of each hole on the
needle plate. (fig. B)
A
B
Your Baby Lock Celebrate is equipped with a long-life LED lighting system, which is not necesary
to change bulbs.
If the LED unit needs replacement, please contact your authorized Baby Lock retailer.
*Remove LED light bulb and replace LED light bulb with the same type, rated (2 watts or less).
*Remove light bulb and replace bulb with the same type, rated (15 watts/110 volts).
U L
Needles