Baby Lock BLMY, Руководство по обслуживанию

Страница: 130 / 226

3 - 51
Needle-presser module Modules
Assembly
19
Lever AB assy. attachment
1. Attach the retaining ring E2 to the lever guide shaft
1
.
2. Apply a small amount of EPNOC AP(N)0 to the lever guide shaft
1
.
3. Apply a small amount of MOLYKOTE EM30L to the upper unit holder
slide groove.
4. Attach the lever AB assy
2
to the lever guide shaft
1
.
5. Attach the lever guide shaft assy
1
to the upper unit holder, and attach the
lever presser plate
3
using the screw
1
.
6. Attach the retaining ring E2 to the lever guide shaft
1
.
Apply EPNOC AP(N)0 to the lever guide shaft
Small amount
XC8387***
Apply MOLYKOTE EM30L to the full width of the
slide lever groove Small amount
XC8385***
Apply MOLYKOTE EM30L to the operating
surfaces of the lever B cap and the thread guide
slider.
Small amount
XC8385***
1
Torque
0.78 – 1.18 N·m
1 Retaining ring E2
1
2 Retaining ring E2
3
1
3
Taptite, Bind B
M3X6
20
Needle bar supporter assy. attachment
1. Attach the needle bar supporter assy
1
to the upper unit holder.
*Key point
• Move the lever AB assy up.
• Turn the T cam, and move the lower end of the Z zigzag lever
to the left.
2. Attach the shaft
2
.
3. Attach the shaft
3
, and install the screw
1
.
4. Attach the plate
4
using the screw
2
.
Lubricate the shaft with FBK OIL RO 100.
1 – 2 drops
XC8388***
1
Torque
0.78 – 1.18 N·m
2
Torque
0.78 – 1.18 N·m
1
2 1
2 4 3
Set Screw, Socket (FT)
M4X4
Screw, Bind
M 3X5