background image

89

4

Maintenance

Simple sewing machine maintenance operations are described below.

Cleaning the machine 
surface

If the surface of the machine is dirty, lightly soak a 
cloth in neutral detergent, squeeze it out firmly, and 
then wipe the surface of the machine. After cleaning 
it once with a wet cloth, wipe it again with a dry 
cloth.

Cleaning the race

Clean the hook and under the needle plate.
Sewing performance will suffer if lint and dust 
collect in the race; therefore, it should be cleaned 
periodically.

a

Turn off the sewing machine, and then unplug 
the power cord from the electrical outlet.

b

Raise the needle and presser foot lever.

c

Pull the flat bed attachment off to the left.

d

Loosen the presser foot holder screw and 
remove the presser foot holder, and then 
loosen the needle clamp screw and remove 
the needle.

e

Grasp both sides of the needle plate cover, 
and then slide it toward you to remove it.

a

Needle plate cover

f

Remove the bobbin case.

Grasp the front of the bobbin case, and then 
pull it out.

a

Bobbin case

g

Use the enclosed cleaning brush or a vacuum 
cleaner to remove any lint and dust from the 
race and its surrounding area.

a

Cleaning brush

b

Race

• Do not apply oil to the race or bobbin case.

Make sure that the sewing machine has been 
turned off, and then unplug the power cord 
before cleaning the machine, otherwise injuries 
or an electric shock may occur.

Do not use benzene, thinner or cleansing 
powder, otherwise the machine may be 
discolored or deformed.

Make sure that the sewing machine has been 
turned off, and then unplug the power cord 
before cleaning the machine, otherwise injuries 
or an electric shock may occur.

CAUTION

CAUTION

a

a

a

b

Содержание A-LINE Grace BL40







































































































Отзывы: