Baby Lock A-LINE Grace BL40 Скачать руководство пользователя

Страница: 3 / 102

Important Safety Instructions

Please read these safety instructions before attempting to use the machine.
This machine is intended for household use.

DANGER

- To reduce the risk of electric shock:

Always

unplug the machine from the electrical outlet immediately after using, when cleaning,

when making any user servicing adjustments mentioned in this manual, or if you are leaving the

machine unattended.

WARNING

- To reduce the risk of burns, fire, electric shock, or injury to persons.

Always

unplug the machine from the electrical outlet when removing covers, lubricating, or

when making any adjustments mentioned in the instruction manual:

• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp

the plug and pull it out of the electrical outlet.

Do not

pull on the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.
•

Always

unplug your machine if the power is cut.

Never

operate this machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or water is spilled on the unit. Return the machine to the nearest

authorized retailer or service center for examination, repair, electrical or mechanical adjustment.

While the machine is stored or in use if you notice anything unusual, such as an odor, heat,

discoloration or deformation, stop using the machine immediately and unplug the power cord.

When transporting the sewing machine, be sure to carry it by its handle. Lifting the sewing

machine by any other part may damage the machine or result in the machine falling, which could

cause injuries.

When lifting the sewing machine, be careful not to make any sudden or careless movements,

otherwise you may injure your back or knees.

Содержание A-LINE Grace BL40







































































































Результаты поиска

Содержание A-LINE Grace BL40

Отзывы:

Похожие инструкции для A-LINE Grace BL40

Бренды по названию

Популярные бренды

Baby Lock A-LINE Grace BL40, Инструкция и справочник

Результаты поиска

Содержание A-LINE Grace BL40

Отзывы:

Похожие инструкции для A-LINE Grace BL40

Бренды по названию

Популярные бренды