Baby Jogger City Tour, Руководство по сборке

Страница: 10 / 20

10
FRAME
1 Unpack the stroller frame from the
box and set the wheels aside .
Unlock the stroller by pulling the
auto-lock lever .
2 Lift the footwell and seat away
from the lower frame . Then lift the
handlebar away from the seat . The
stroller will lock into place and you
will hear a click .
3 Place the stroller in the upright
position .
WARNING: Ensure that all the
locking devices are engaged before
use .
FRONT WHEEL
4 Installation
• Attach front wheels by sliding
them into the front wheel mount
until it clicks. Gently pull on the
front wheel to make sure it is
properly attached .
5 Removal
• While pressing the front wheel
release button, gently slide the
front wheel out of the front wheel
mount .
SWIVEL FEATURE
6 Push the swivel lock button up
to lock the front wheel to a fixed
position .
7 Press the swivel lock button down
to allow the front wheel assembly to
swivel .
WARNING: When loading and
unloading child, lock the front wheel
in a fixed position . Although the
front wheel of your stroller locks, it is
not intended for jogging or exercise
purposes .
REAR WHEELS
8 Installation
• Align the rear wheel axle with the
wheel mount on the stroller frame
and insert it into the wheel mount
until it locks into place . You will
hear a click .
• Gently pull on the rear wheel to
make sure it is properly attached .
9 Removal
• While pressing down on the wheel
release button, gently slide the rear
wheel out of the wheel mount .
BRAKE
10 To lock the brakes: push the brake
lever down to engage the brakes .
11 To release the brakes: lift the brake
lever up .
WARNING: Lock the brakes before
loading and unloading your child and
whenever the stroller is not moving .
CANOPY
12 Pull forward to open canopy, push
backwards to close canopy .
13 To use the canopy extension: Pull
the extension out from under the
canopy until it snaps into place,
push the extension under the main
canopy to hide .
ADJUSTING SHOULDER STRAPS
14 From the back of the seat, undo the
fastening strip and open the pocket
to locate the plastic square stopper .
Turn stopper and pass through the
openings in the plastic board and
seat fabric .
15 Reinsert stopper at seat opening
closest to child’s shoulders . Pass
back through seat fabric and plastic
board . Tug on strap to ensure
stopper is locked . Repeat on both
sides .
WARNING: Avoid serious injury from
falling or sliding out . Always properly
adjust and fasten safety harness .
EN EN EN