Baby Jogger city premier, Руководство по сборке

Страница: 11 / 16

11
USING SAFETY HARNESS
20 Insert side strap buckle into harness
buckle on both sides.
21 Insert connected harness and side strap
buckles into the sides of the crotch
buckle.
22 Press button on crotch buckle to
release.
PLACE THE SEAT ON THE FRAME
23 Align the Accessory Mounting Brackets
with the mounting brackets on the
stroller frame.
24 Slide the seat into the brackets until it
clicks into place. Ensure that both sides
of the seat are securely fastened into
the frame before use.
NOTE: The seat may be installed either
forward-facing or rear-facing.
REMOVE THE SEAT
25 Press gray tabs on Mounting Brackets
and pull up.
WARNING : Always remove your child
from the seat before removing the seat
from the frame.
RECLINE THE SEAT
26 Lift the Seat Recline Lever located
at the top of the seat, behind the
canopy.
27 Pull down to lower the seat and pull up
to raise the seat until it clicks into the
desired position.
HANDLE HEIGHT ADJUSTMENT
28 Simply squeeze the Handle Adjustment
Button and slide the handle up or down
to the desired length.
ADJUSTABLE FOOTWELL
29 Adjust the angle: Press the Adjustment
Buttons on the Footwell and move it up
or down until it clicks into the desired
position.
30 Adjust the length: Press the bottom
buttons on the Footwell and slide it in or
out until it clicks into place.
BASKET REMOVAL
31 Unfasten the top snaps of the Basket
around the middle support bar of the
frame. Then unfasten the bottom snaps
around the side support bars of the
frame.
32 Unhook the top front plastic loop from
over the metal knob on the front of the
frame. Repeat for the opposite side.
33 Unthread the front fastening strips
through the plastic loops located behind
the front wheel mount.
FOLDING
• Remove your child from the seat.
• The stroller may be folded with or
without the seat attached, and forward-
facing or rear-facing.
• When folding rear-facing, it is
recommended that the seat be reclined
all the way before folding.
34 Squeeze the fold buttons on the back
of the seat and fold the seat forward.
35 Push the red button on the frame until
it clicks.
36 Pull up on the folding strap and let the
frame colapse.
37 Make sure the storage lock lever clicks
into place.
• The stroller should be carried by
holding the frame in a secure and
balanced position to avoid any potential
injuries from falls.
REMOVING THE SEAT FABRIC
38 Unsnap the seat fabric from the seat
frame.
39 From the back of the seat, unfasten the
hook-and-loop and slide the strap
through the D-ring.
40 Press the Footwell Adjustment Buttons
and pull out on the Footwell to remove
the footwell bar from the seat frame.
41 Pull the seat fabric out of the channel in
the Footwell bar.