If you can not remedy problems by using the troubleshooting chart above, visit babybrezza.co.uk
to contact a customer service representative.
1. Place the appliance on a flat surface where it is out of reach of children
and it will not be knocked or moved during operation.
2. Remove the lid, baskets and accessory rack from the steriliser base.
3. Pour water on the base/heater surface to MAX line (165ml/5.5oz).
Never fill past MAX line. We recommend using distilled water to avoid
mineral scale build-up on the heating plate. However, you can use bottled
water or tap water but you may need to descale more frequently.
4. Place the lower basket on the base.
5. Place clean bottles with their opening facing downward on the bottle posts
6. Place the accessory tray in the lower basket (tray not for use with tall bottles).
7. Place bottle accessories on the accessory rack (nipples, collars, caps, etc)
8. Place the upper basket on top of the lower basket, ensuring that it fits
securely without any gaps.
9. Place breast pump parts or more accessories in the upper basket.
10. Press the On/Off button once and the function icons will light up.
Choose your desired function following the instructions below.
If no function is selected after pressing on/off button, the
appliance will automatically switch off.
Automatic Sterilise/Dry Function:
1. Choose the drying time (after steam sterilisation): Press the Sterilise/Dry
button 1 time for 30 minute dry time, 2 times for 45 minute dry time,
3 times for 60 minute dry time. The sterilise/dry cycle will start 3 seconds
after the last button press.
2. When the sterilisation cycle starts, the timer will count up second-by-second
for the duration of the sterilisation cycle.
3. When the sterilisation cycle is complete, the appliance will beep, pause for
3 seconds and begin the drying cycle for the amount of time selected in
step 1. The timer will count down second-by-second until it
reaches 00:00.
4. When the drying cycle is completed, the appliance will beep 5 times and
switch off automatically.
Troubleshooting
5
6
Modular set-up options
Upper & Lower Baskets
WITHOUT Accessory Tray
For use with tall bottles,
and accessories.
Upper Basket only
WITHOUT Accessory Tray
For use with accessories
pacifiers and small items.
The tongs can be inserted and stored in the
upper basket or the accessory tray.
When the tongs are clicked into place,
they can be used to lift the basket or tray.
Gently squeeze the tongs to remove them.
They can also be used to grasp parts and
bottle nipples in the steriliser.
Breast pump parts and any other items safe for
steam sterilisation can be placed in the lower or
upper baskets. Try different configurations to find
what set-up works best for you.
TIP: For best drying performance, Do not overload
the Steriliser Dryer.
Upper & Lower Baskets
With Accessory Tray
For use with short bottles,
accessories & pump parts.
Lower Basket only
With Accessory Tray
For use with short bottles,
accessories & pump parts.
Using the tongs
or
Condition
Possible Cause
Remedy
Appliance will
not start.
Unit is unplugged.
Unit is not turned on.
Insufficient water is in heater
plate area.
Add 165ml (5.5oz) water to heater
plate area.
Make sure the plug is securely
inserted into the power outlet.
Press On/Off switch before
choosing function.
Clean heater plate after each use
and use distilled water.
Scaling on
water tank
heater plate.
Items not dry
after drying cycle.
Water is collecting on recessed or
indented areas of items placed
in sterilizer.
Mineral rich water used
persistently.
Make sure to fill to max line, at
least 165m (5.5oz) water to
heater plate area.
Timer stops during
sterilise cycle. “No
Water Indicator” on.
Timer Stops During
Sterilise cycle. “No
Water Indicator” on
while there is water
remaining in the
base
Scaling on water tank heater plate.
The machine hasn’t been descaled
on a weekly basis.
Descale the machine following
the weekly descaling instructions
on page # 4
Not enough water added to heater
plate area.
Make sure parts are placed so they
they do not collect water.
Drying cycle selected not long
enough to sufficiently dry items
in sterilizer.
Select longer drying time.