Set-up and Use
4
3
1. Place the appliance on a flat surface where it is out of reach of children
and it will not be knocked or moved during operation.
2. Remove the lid, baskets and accessory rack from the steriliser base.
3. Pour water on the base/heater surface to MAX line (165ml/5.5oz).
Never fill past MAX line. We recommend using distilled water to avoid
mineral scale build-up on the heating plate. However, you can use bottled
water or tap water but you may need to descale more frequently.
4. Place the lower basket on the base.
5. Place clean bottles with their opening facing downward on the bottle posts
6. Place the accessory tray in the lower basket (tray not for use with tall bottles).
7. Place bottle accessories on the accessory rack (nipples, collars, caps, etc)
8. Place the upper basket on top of the lower basket, ensuring that it fits
securely without any gaps.
9. Place breast pump parts or more accessories in the upper basket.
10. Press the On/Off button once and the function icons will light up.
Choose your desired function following the instructions below.
If no function is selected after pressing on/off button, the
appliance will automatically switch off.
Automatic Sterilise/Dry Function:
1. Choose the drying time (after steam sterilisation): Press the Sterilise/Dry
button 1 time for 30 minute dry time, 2 times for 45 minute dry time,
3 times for 60 minute dry time. The sterilise/dry cycle will start 3 seconds
after the last button press.
2. When the sterilisation cycle starts, the timer will count up second-by-second
for the duration of the sterilisation cycle.
3. When the sterilisation cycle is complete, the appliance will beep, pause for
3 seconds and begin the drying cycle for the amount of time selected in
step 1. The timer will count down second-by-second until it
reaches 00:00.
4. When the drying cycle is completed, the appliance will beep 5 times and
switch off automatically.
Before placing items in the appliance for sterilisation it is important that
All bottles, pump parts and accessories must be EMPTY, CLEAN & FULLY
RINSED BEFORE USE in this steriliser dryer
Cleaning
- Always unplug your product before cleaning.
- Do not immerse the base, the supply cord or the plug in water or other liquids.
- Do not clean base under water tap.
- Use a soft damp cloth to clean the base and control console.
- Never use abrasive pads to clean the plastic parts of the machine.
- The lid, accessory rack can be cleaned in hot soapy water.
- Do not use abrasives or solvents for cleaning; they may damage the appliance
and the surface of the heating plate.
Sterilise only function:
1. Press the Sterilise button one time, the timer will display “00:00” and the
steam icon. The sterilisation cycle will start 3 seconds after pressing the
sterilise button and the timer will count up second-by-second for the duration
of the sterilisation cycle.
2. When the sterilisation cycle is complete, the appliance will beep 5 times
and switch off automatically.
Dryer only function:
1. Press the Dry button 1 time for 30 minute dry time, 2 times for 45 minute
dry time, 3 times for 60 minute dry time. The drying cycle will start 3 seconds
after the last button is pressed and the timer will count down second-by-second
until it reaches 00:00.
2. When the drying cycle is completed, the appliance will beep 5 times and
switch off automatically.
Caution: If it is necessary to remove water from the base,
always POUR AWAY FROM FAN OPENING. Note water
pour direction icon on base, and pour in direction of arrow.
This marking indicates that products should not be disposed of with other household wastes. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection systems or
Contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Descaling:
Please descale the heating plate of the Steriliser weekly to prevent overheating,
malfunction or product failure.
- Mineral residue, particularly in hard water areas, may deposit on the
heating plate after the sterilisation cycle. To avoid scale build up, wipe
the surfaces with a soft moist cloth after each operation.
- Mineral Deposits can be removed with descaling solution or by leaving
60ml/2oz white vinegar on the heating plate for approximately 30 minutes.
The plate should then be rinsed and wiped with a clean, dry cloth.
Some harmless discoloration spots may remain after cleaning but they have
no effect on performance.
- You can descale more frequently if necessary.