Limited 1-Year Warranty
The limited warranty is valid only on products bought through authorized resellers and used in the
United States and Canada. Buying through an unauthorized reseller or using this product outside of
the United States and Canada automatically voids this warranty.
This warranty is available to consumers only. You are a consumer if you own a Baby Brezza
appliance that was purchased at retail for personal, family or household use. Except as otherwise
required under applicable state law, this warranty is not available to retailers or other commercial
purchasers or owners. We warrant that your Baby Brezza appliance will be free of defects in
material or workmanship under normal home use for one year from the date of original purchase.
Customer will be required to present original proof of purchase in order to obtain the warranty
benefits. In the event that you do not have proof of purchase date, the purchase date for purposes
of this warranty will be the date of manufacture. If your Baby Brezza appliance should prove to be
defective within the warranty period, we will repair it or, if we consider it necessary, replace it.
To obtain warranty services, please call Customer Service at 1-888-396-6552 or write to:
Baby Brezza, 250 Passaic Street, Newark, NJ 07104 Attn: Customer Service.
If you can not remedy problems with the machine by using the troubleshooting chart above,
please contact Customer Service at 1-888-396-6552 or email [email protected]
Any other servicing should be performed by an authorized service representative.
Troubleshooting
Condition
Possible Cause
Remedy
Appliance will
not start.
Unit is unplugged.
Unit is not turned on.
Insufficient water is in heater
plate area.
Add 180ml water to heater plate
area.
Make sure the plug is securely
inserted into the power outlet.
Press On/Off switch before
choosing function.
5
6
Clean heater plate after each use
and use distilled water.
Scaling on
water tank
heater plate.
Items not dry
after drying cycle.
Water is collecting on recessed or
indented areas of items placed
in sterilizer.
Mineral rich water used
persistently.
Make sure parts are placed so they
they do not collect water.
Drying cycle selected not long
enough to sufficiently dry items
in sterilizer.
Select longer drying time.
Modular set-up options
Upper & Lower Baskets
WITHOUT Accessory Tray
For use with tall bottles,
and accessories.
Upper Basket only
WITHOUT Accessory Tray
For use with accessories
pacifiers and small items.
The tongs can be inserted and stored in the
upper basket or the accessory tray.
When the tongs are clicked into place,
they can be used to lift the basket or tray.
Gently squeeze the tongs to remove them.
They can also be used to grasp parts and
bottle nipples in the sterilizer.
Breast pump parts and any other items safe for
steam sterilization can be placed in the lower or
upper baskets. Try different configurations to find
what set-up works best for you.
TIP: For best drying performance, Do not overload
the Sterilizer Dryer.
Upper & Lower Baskets
With Accessory Tray
For use with short bottles,
accessories & pump parts.
Lower Basket only
With Accessory Tray
For use with short bottles,
accessories & pump parts.
Using the included tongs
or
