Set-up and Use
4
3
1. Place the appliance on a flat surface where it is out of reach of children
and it will not be knocked or moved during operation.
2. Remove the lid, baskets and accessory rack from the sterilizer base.
3. Pour distilled water on the base/heater surface to MAX line (165ml/5.6oz).
Never fill past MAX line.
4. Place the lower basket on the base.
5. Place clean bottles with their opening facing downward on the bottle posts
6. Place the accessory tray in the lower basket (tray not for use with tall bottles).
7. Place bottle accessories on the accessory rack (nipples, collars, caps, etc)
8. Place the upper basket on top of the lower basket, ensuring that it fits
securely without any gaps.
9. Place breast pump parts or more accessories in the upper basket.
10. Press the On/Off button once and the function icons will light up.
Choose your desired function following the instructions below.
If there is no selection of function after pressing on/off button, the
appliance will automatically switch off.
Automatic Sterilize/Dry Function:
1. Choose the drying time (after steam sterilization): Press the Sterilize/Dry
button 1 time for 30 minute dry time, 2 times for 45 minute dry time,
3 times for 60 minute dry time. The sterilize/dry cycle will start 3 seconds
after the last button press.
2. When the sterilization cycle starts, the timer will count up second-by-second
for the duration of the sterilization cycle.
3. When the sterilization cycle is complete, the appliance will beep, pause for
3 seconds and begin the drying cycle for the amount of time selected in
step 1. The timer on the timer will count down second-by-second until it
reaches 00:00.
4. When the drying cycle is completed, the appliance will beep 5 times and
switch off automatically.
Before placing items in the appliance for sterilization it is important that
All bottles, pump parts and accessories must be EMPTY, CLEAN & FULLY
RINSED BEFORE USE in this sterilizer dryer
Cleaning
- Always unplug your product before cleaning.
- Do not immerse the base, the supply cord or the plug in water or other liquids.
- Do not clean base under water tap.
- Use a soft damp cloth to clean the base and control console.
- Never use abrasive pads to clean the plastic parts of the machine.
- The lid, accessory rack can be cleaned in hot soapy water.
- Mineral residue, particularly in hard water areas, may deposit on the stainless
steel heating plate after a few sterilization cycles. To avoid scale build up, wipe
the surfaces with a soft moist cloth after each operation.
- Deposits can be removed with scale removers or by leaving 60ml/20oz
water and vinegar solution (50/50 water & vinegar mix) on the heating
plate for approximately 30 minutes. The plate should then be wiped clean with
a clean, dry cloth. Some discoloration spots may remain after cleaning with a
vinegar solution, but these are harmless.
- Do not use abrasives or solvents for cleaning; they may damage the appliance
and the surface of the heating plate.
Sterilize only function:
1. Press the Sterilize button one time, the timer will display “00:00” and the
steam icon. The sterilization cycle will start 3 seconds after pressing the
sterilize button and the timer will count up second-by-second for the duration
of the sterilization cycle.
2. When the sterilization cycle is complete, the appliance will beep 5 times
and switch off automatically.
Dryer only function:
1. Press the Dry button 1 time for 30 minute dry time, 2 times for 45 minute
dry time, 3 times for 60 minute dry time. The drying cycle will start 3 seconds
after the last button is pressed and the timer on the timer will count down
second-by second until it reaches 00:00.
2. When the drying cycle is completed, the appliance will beep 5 times and
switch off automatically.
Caution: If it is necessary to remove water from the base,
always POUR AWAY FROM FAN OPENING.
Note water pour direction icon on base,
and pour in direction of arrow.
