2
3
1
1
2
Monthly Cleaning Instructions
Hand-wash all parts shown above with warm
soapy water, rinse well and dry thoroughly.
Hand wash water tank and lid with warm
soapy water, rinse well and dry thoroughly.
Easy Daily Cleaning Instructions
Once a month, give your Formula Pro® Mini a thorough cleaning.
Remove Funnel & Funnel Cover by pulling
out and down.
Wash Funnel & Funnel Cover with warm,
soapy water & rinse well.
Dry completely before re-installing.
Wipe the powder-dispensing hole on the
underside of the powder container using a
dry paper towel or soft dry cloth.
IMPORTANT
Monthly Descaling Instructions
Please watch set-up and cleaning videos at babybrezza.com/video.
It is EXTREMELY IMPORTANT to clean the funnel after every 4 bottles made.
This will keep your Formula Pro® Mini dispensing accurately
The machine will not work unless the funnel is cleaned after every 4 bottles.
Always make sure Funnel & Funnel cover are COMPLETELY DRY before re-assembling.
PLEASE NOTE: You don’t need to remove the powder container or the powder container parts for daily cleaning.
To make daily cleaning even easier, you can
purchase an spare funnel & funnel cover on
BabyBrezza.com Then you can swap the
spare funnel with the funnel that needs
to be cleaned. NOTE: you will still need to
wipe the powder dispensing hole as shown in Step 3
Suggestion to make cleaning easier
It is necessary to remove all formula from the powder container for the monthly descaling.
To prevent mineral scale on the water heater inside your Formula Pro® Mini, follow these easy steps:
1. Remove the water tank, empty it and fill it with 20oz of purified water and 1 bottle of Baby Brezza descaler
or 8oz distilled vinegar. Baby Brezza descaler is available at
babybrezza.com
2. Place the water tank on the base of the machine and place a cup larger than 10oz under the funnel.
3. Select “10oz” with the “oz” button, then press the “
start
” button to dispense.
4. Empty the cup, put it back under the funnel, then press the “start” button again to dispense another 10oz.
5. Now unplug the machine, remove the water tank, and empty it. Let the machine sit for 4 hours.
6. Wash, rinse and fill the water tank to the max line with purified water, then place it back on the base.
7. Plug in the machine, place a cup to catch 10oz water and use the “start” button to run an 10oz cycle.
Dispose of the water dispensed in the cup and then repeat this step to run the entire tank of purified water
through the machine. When the “Low Water” indicator turns on, you’re done rinsing.
8. Refill the water tank with purified water and return to normal use.
12
11