Baby Brezza Formula Pro FRP0045 Скачать руководство пользователя страница 6

Refill when stirring wheel arms are visible.
Never use machine with powder below
MIN line.

USER TIPS

Make sure powder is not above the MAX 
line before closing lid. 
Use prongs on underside of powder 
container lid to gently level the powder.

MONTHLY CLEANING

Hand-wash powder container and
associated parts and dry thoroughly.

Wipe base with soft, damp cloth or 
sponge and dry with a dry paper towel.

1

Wash inside of water tank and wipe 
outside with clean damp cloth. 
Never immerse base of tank in water 
or get it wet. It houses electronics that 
must remain dry. If the electronics in the
base of water tank get wet, allow to dry 
thoroughly for at least 24 hrs before using.

Wipe any spilled formula off machine
including the side covered by the water
tank. It is very important to keep the 
entire Formula Pro® clean. 

1

1

10

1

2

3

2

Please watch set-up and cleaning videos at babybrezza.com/video.

DAILY CLEANING

To wash, always use a non-abrasive sponge and hand wash with warm soapy water. Never use hot/boiling water, or 
put any parts in a dishwasher or sterilizer. Dry parts thoroughly; always make sure parts are completely dry before 
using again. 
Must be cleaned daily or after every four bottles when the funnel LED indicator light illuminates.

Remove Funnel & Funnel Cover by pulling 
out and down. 

Wash the funnel and funnel cover and 
dry thoroughly before replacing.

Wipe the powder-dispensing hole using a dry 
paper towel or soft dry cloth.

Always make sure the Funnel and Funnel Cover are completely DRY before placing in the machine. 

Never use a wet or damp cloth to clean the powder dispensing hole or underside of Powder Container.

Wipe any spilled powder off base of machine. 

9

IMPORTANT!

1

3

IMPORTANT

4

2

3

Содержание Formula Pro FRP0045









Отзывы: