1
2
3
4
5
6
7
8
1
2
Set-up instructions
Now place the
powder container
on the base
with the printed markings facing you.
Now place the
stirring wheel
on the axle
and push down firmly until you hear a click.
Make sure the stirring wheel is snapped in
place and does not lift up easily.
Place the
axle
on the base as shown.
After hand washing these parts, make sure
they are all
completely dry
before assembly.
Assemble the
funnel & funnel cover.
Then Insert funnel assembly into funnel
compartment by sliding it up, then in.
Make sure the
locking cover & measuring wheel
look like this when assembled.
Place the
measuring whee
l into the powder
container, fitting it over the axle with the flat
side facing down.
Make sure the holes in the measuring wheel
are in the same position as shown above.
1. Place the front edge of
locking cover
in the recess in the inside/front of the
powder container,
UNDER THE TAB
.
2. Fit hole in locking cover over top of axle.
It will not lay completely flat.
IMPORTANT
Set-up and cleaning videos available at elfe.com.
Set-up instructions continued
Now you’re ready to add powder and make your first bottle.
click
click
6
5
