3
4
Steady Warm
(ideal for warming breastmilk)
6
. Press to begin heating.
1
. Place bottle in the bottle tray and fill the bottle warmer with water until it matches the level
of the milk inside the bottle.
Always use room temperature water for best heating results.
Using warm, hot or cold water will result in inaccurate or dangerous bottle temperatures.
1
. Fill the measuring cup (included on the back of the warmer)
with
room temperature water
.
Do not use warm, hot or cold water,
which will result in inaccurate or dangerous bottle temperatures.
Empty the measuring cup into the warmer as shown.
Water level will be at the “Quick Warm” fill line - see arrow below.
2
. Close the bottle warmer cover.
4
. Use the setting guide on the back of this manual to determine the setting
for your bottle. Make sure to select the correct bottle size and material.
• If your bottle is
cold
(refrigerated 39°F / 4°C) press repeatedly to select your setting.
5
. Identify the
starting temperature
of your bottle.
• If your bottle is
room temperature
(approximately 70°F / 21°C) press
repeatedly to select your setting.
If you are warming multiple bottles, allow the bottle warmer to cool before
warming the next bottle.
If you are warming multiple bottles, allow the bottle warmer to cool before
warming the next bottle.
Fill warmer with water to
level of milk in the bottle.
Fill warmer with water to the Quick Warm Fill line.
(use measuring cup included with warmer)
3
. Press to turn on machine.
7
. Warmer will beep when bottle is ready. Remove bottle immediately
after warming is complete, swirl bottle gently and check temperature
before feeding baby .
7
. Warmer will beep when bottle is ready. Remove bottle immediately after
warming is complete, swirl bottle gently and check temperature
before feeding baby.
2
. Place bottle in the bottle tray and close the bottle warmer cover.
4
. Use the setting guide on the back of this manual to determine the setting
for your bottle. Make sure to select the correct bottle size and material.
3
. Press to turn on machine.
6
. Press to begin heating.
Please note: the quick warm mode uses steam to warm bottles.
Please use caution when opening the lid after warming cycle is complete.
Always use the bottle tray to remove the bottle from the warmer and
avoid touching any hot areas of the bottle warmer. The outside of
warmed bottle may be hot immediately after warming.
• If your bottle is
cold
(refrigerated 39°F / 4°C) press repeatedly
to select your setting.
5
. Identify the
starting temperature
of your bottle.
• If your bottle is
room temperature
(approximately 70°F / 21°C) press
repeatedly to select your setting.
Quick Warm
(ideal for warming formula or baby food)
