23
1. Loosen the harness straps by pulling them gently while pressing the
harness adjustment button
(E)
(fig.8.1)
2. Loosen the harness straps from the back of the seat, freeing them
from the harness connector
(I)
. Repeat the operation with the
shoulder straps connector
(O)
(fig. 8.2 and 8.3).
3. Pull the harness straps from the front to free them from the seat
back (fig. 8.4).
4. Take off the safety buckle
(D)
, passing the retention plate through
the seat base slots.
2. Removing the fabric cover
1. Take off the headrest fabric cover (fig.8.5).
2. Take off the seat cover unbuttoning the brackets that secure the
cover to the plastic base. Pull the shoulder straps
(B)
through the
base cover eyelets (fig.8.6).
3. Take off the fabric cover from the car seat.
9. INSTALLING THE CHILD SEAT. GROUP 2
GROUP 2 only. From 4 to 6 years approx. (15-25 Kg)
NOTICE
Before installing the seat for Group 2, the seat harnesses
(B)
, harness
protectors
(C)
and
buckle
(D)
must be removed. Please, for this, follow
chapter 8.1.
1. Ensure the seat is not in a reclined position (the indicator should be in
position 1) and is ready to install in forward position (Group 1) as shown
in fig. 6.1. Pull the lever
(G)
forward and adjust the angle of recline to
position 1 without releasing the lever. If it is necessary swivel the seat
180º to place the seat in the direction of travel (fig. 6.1.A). Release the
lever when the seat is in the desired position (fig. 6.1)
2. Place the child safety seat in the back seat of the vehicle facing in
the direction of travel (fig. 6.3).
10. PLACING THE CHILD IN THE SEAT. GROUP 2
1. According to the child’s height the headrest can be adjusted up or
down. Place your hand on the headrest height regulator and pull while
pulling the seat down with the other hand so it does not move (9.1).
2. Place the child safety seat in the back seat of the vehicle facing in
