i
Changing voltage or fuses
To facilitate this operation, it is preferable to
remove the traction system.
¾
Remove the fuse-holder located under the
traction system, near the power socket,
using a flat screwdriver.
Changing voltage
¾
Remove the voltage selector, then switch it
to the required voltage.
¾
Then change the two fuses depending on the new voltage.
100 V and 120 V fuses = 1.25 A T
220 V and 240 V fuses = 0.63 A T
In case of doubt, call the BABOLAT After-Sales Service Centre.
Changing fuses
TYPE OF FUSE:
HPC 5x20 mm ceramic
BE CAREFUL:
in the event of a problem, you should change both fuses at the same time.
The warranty will be invalidated by the use of any fuses other than those
recommended by BABOLAT.
i
Replacing the elliptic turntable
¾
Position the elliptic turntable so that the
posts are located in the machine's axis with
the "racket throat" positioning symbol on the
traction system side.
¾
Lock the turntable and the clamp-holders and
remove the clamps and billiards.
¾
Unscrew the 6 screws with the size-5 Allen
key.
¾
Lift up the turntable and remove it from its
central pivot.
¾
Position correctly the new turntable, making
sure the interlocking elements are lined up.
¾
Fix the turntable with the 6 screws,
tightening to the standard torque.
14
