Machine configuration messages (read only)
Program version number
Number of rackets strung by machine (approximate
value calculated according to number of tractions)
Number of tractions completed by machine
Length of time for which the machine has been on
(in hours)
Serial number of machine
Machine status
Status messages during traction
Display of actual tension applied to string
Display of tension applied to string during "knot"
traction cycle (tension value + pre-set KNOT value)
Buzzer
The buzzer goes off whenever:
- the traction head comes to its end of travel,
- the "SHIFT" key is held down for long press,
- the traction head reaches the tension value, provided that the BIP function is
activated.
Factory settings
The factory settings are the current settings when you start the machine up for the first
time. They will remain programmed until you decide to change them.
The factory settings are as follows:
- TENSION: 25.0 kg,
- PRESTRETCH: 0 %,
- KNOT: + 2.0 kg,
- LANGUAGE: English,
- BIP: yes.
10
VERSION
RACKETS
TRACTION
SERIAL NR
CHECK
ACTUAL
KNOT
WORK. TIME
