![background image](http://html1.mh-extra.com/html/babboe/city/city_assembly-manual_3159837010.webp)
9
STEP 4.1
Mounting the steering stem
1. Remove the protective caps from the steering stem (top and underside).
2. Also remove the protective cap on the end of the steering pin
(the extension of the steering arch).
3. Position the steering bar (handlebars) above the stem. Then insert the
steering pin into the stem.
Tools required:
- Hex key 5mm and 6mm
4. Tighten the handlebars by using the hex key on the hex bolt on the bar.
This will firmly secure the handlebars on the stem. You can determine the
final height and position once the bike has been fully assembled.