Babboe Carve, Инструкция по эксплуатации

Страница: 6 / 12

EN | Babboe Carve rain tent - Manual for mounting
Congratulations on the purchase of your rain tent for your Babboe Carve cargo bike!
Below you will find instructions on how to install the rain tent. To remove the cover,
please follow the steps in reverse order.
Contents of the box:
•
Tent
• Frame
• Torx spanner
• Sachet (4 screws, 4 cap nuts, 4 lock washers, 8 washers)
You will also need:
•
Phillips screwdriver
• Ring/open-ended spanner (size 10)
• Allen key (size 4)
Step 1
Mounting the frame in the tent
1. Lay the tent on a flat surface, with the inside of the tent facing up.
2. Now place the frame on the tent (photo 1).
3. First, secure the tent to the thick poles of the frame using the short zips (photo 2).
4. Then zip the long zip around the thinner pole (photo 3).
5. Set the frame and tent aside and continue with step 2.
Step 2
Attaching the frame to the box
Before placing the frame, unscrew the bolts in the box
(photo 4).
1. Using the torx spanner and Allen key, unscrew the
two bolts on the left-hand side on the inside of the
box. Set the bolts aside for now, you need them
later. Repeat this step for the right-hand side.
Photo 1
Photo 3 Photo 2
Photo 4