Documentation
KNXEASY
KNXEASY
Version 1
b.a.b-technologie gmbh 25
The “State of IP address alarms” field displays the current state of configured alarms. A state contains one
text field containing information about the alarm:
-
The IP address or hostname
It contains also a list of dates. Those are datetimes when an alarm occured. Finally an “Empty dates” button
will simply clear the list of dates.
Figure 30: Alarm States Green
Each time these IP addresses are checked, the alarm state is updated. These IP addresses are checked
according to the period you have chosen but also when you check directly the IP address (see "Check IP
address"). If the IP address is found and available the text color stays or turns green. Otherwise the text
color stays or turns red.
Alarm notification
If an alarm occurs, it will be notified by different processes. First of all the “Alarm States” field is updated.
The first alarm turns red and a Date entry is added to the list.
Figure 31: Alarm State Red
Then, a warning message is displayed on the LCD screen. This message specifies every information about
the alarm. Finally if Connections are configured, the same warning message will be sent via those
Connections.
Attention:
Every IP addresses or hostnames linked to alarms are checked one first time, as soon as you save the
configuration. Therefore, be aware that you will trigger alarmes if these IP addresses are not
available when you configure these alarms.
INFO
In the web interface go to the main menu “Info”. You can there check many information such as “Version”,
“Serial Number”, “Temperature (System)” …
3
KNXEASY
3.1
INTRODUCTION
