BAB TECHNOLOGIE DUODMX Series, Руководство пользователя

Страница: 7 / 75

DUO DMX GATEWAY
DUO DMX GATEWAY
BAB TECHNOLOGIE GmbH 7
1 INTRODUCTION
DMX (Digital Multiplex) is a control protocol in the event technology and therefore has a solid, reliable
and simple design. The standard in its current form has existed since 1990. Due to its popularity, it
offers a wide range of functions at low acquisition costs.
The DUO DMX GATEWAY has a network interface (LAN and WLAN, depending on the variant) and two
independently configurable DMX outputs (DMX worlds) with 512 channels each, allowing you to
control, for example, two rooms/areas separately.
The DUO DMX GATEWAY can be operated as a DMX master or slave. The gateway sends DMX packets in
master mode and receives them in slave mode.
Nine different device variants position the DUO DMX GATEWAY ideally for usage in almost any required
scenario. The device is used as DMX gateway for KNX® or EnOcean® systems but can also be operated
as a standalone device – straight with a native App for iOS® and Android® smartphones for particularly
easy operation.
The professional configuration software not only enables you to dim individual channels, but also to
program complex sequences.
The DUO DMX GATEWAY is highly suitable for subsequent installation as a device installed in the ceiling.
A corresponding adapter is available for top DIN rail installation.
In addition to the recessed ceiling version, the DUO DMX GATEWAY is also available as REG (Modular
device (REG) housing 4 units).
2 THE GATEWAY
The DUO DMX GATEWAY is a ceiling installation device, and its compact size also enables specific
installation situations. The REG variant (Modular device housing), on the other hand, is for installation in
distribution boxes. The device has 2 separate DMX interfaces which are controlled separately.
Specifications:
Power supply:
 Power over Ethernet (PoE) (via RJ-45 except REG variant)
 Terminal: 12-32VDC
 Power consumption: <= 1.2W
Mechanical data:
 Assembly: Ceiling installation / DIN rail adapter:
Modular device housing 4 MW
DIN rail EN 50022 – 35x7.5

Dimensions (W x H x D) in mm:
Ceiling installation without fastening lugs: 50x26x116
with fastening lugs: 50x26x146
Modular device housing 70x90x63
Interfaces (model-dependent):
 KNX via terminal (twisted pair)
 Network via RJ45 connection

Wireless network via external SMA antenna (except REG variant)

EnOcean via external SMA antenna (except REG variant)

2xDMX 512 terminal, conductor cross-section: 1.5mm²

Input feeler terminal, conductor cross-section: 1.5mm²