Mounting
DUO DMX
Gateway
6 b.a.b-technologie gmbh
DUO DMX
Gateway
3
MOUNTING
The device can be used for installation in ceilings or alternatively for DIN Rail mounting. In case of
ceiling mounting the device has grounding clips on each side. For DIN Rail mounting an additional
adapter has to be used. The grounding clips can be broken off easily if wanted.
Figure 1: DUO DMX Gateway with grounding clips
DIN Rail Bar adapter
The adapter is fixed on the chassis with 2 screws (part of delivery). Please note that the adapter only
may be screwed in the two folded holes.
Figure 2: DIN Rail Bar Adapter
Note: Please attach the DIN rail Adapter only on the two marked holes. Using the wrong holes the
screw ends might touch the bottom of the circuit board!
Please be careful if you need to troubleshoot a device mounted on the DIN rail. Pull with too much
force on the gateway, the screws can be pulled out from the chassis.
