Baaske Medical e-medic 2011945e, Руководство пользователя

Страница: 15 / 32

15
CONNECTION METHOD
No tools are required to set up the LCD monitor. Simply follow the instructions outlined
in the next few pages.
Connectors for the signal cables, power are located on the back of the panel behind the
cover door. Please refer to the diagram on this page for the connector configuration.
Connect Power Adapter and Cable
Connect the female end of the power cable to the AC power input receptacle on the
LCD Monitor. Then, plug the male end of the power cable into an AC outlet.
Connect DVI/DP Cable
If you have a DVI/DP digital graphics card adapter and a DVI/DP cable, connect it to
the DVI/DP connector of the monitor. The optional DVI/DP graphics adapter and the
DVI/DP cable can be ordered by contacting dealer directly.
VGA connector
The VGA cable is transmitting the image data to your flat screen. The cable has two
15pin D-Sub VGA connectors to connect to your graphic adapter.
• Connect one end of the cable with your flat screen. Take care to connect it cor-
rectly and please use the little screws to make sure the cable will not disconnect.
• Connect the other end of the VGA cable with the graphics adapter in your
computer.
Please use the little screws to make sure the cable will not disconnect.
• First turn on your flat screen and then turn on your computer.
The LED is green until the display receives a signal from the computer.
*Connect USB / RS232 Cable
Connect USB / RS232 in connector of the LCD monitor and PC out device.
With the attached USB / RS232 cable.
*Connect Audio Cable
Connect Audio in connector of the LCD monitor and Audio out device (PC.DVD,CD...)
with the attached stereo mini cable.