16
17
17
4. Attaching the Filter onto your optics
How to attach your Baader Solar Filter onto your Telescope,
Spotting Scope, Binocular or Camera Lens:
4.1
Hold the filter in front of the tube and gently push the three
bolts onto the outer rim of your optics. The safety straps
are hanging loosely from the bolts.
4.2
Peel off the carrier film to reveal the sticky bottom of the
Velcro tape. Gently stretch out the safety strap (without
forcing it) and attach the sticky side to your optical tube at
maximum length. Firmly push it to the tube, so that it can
not accidentally come off.
16
In order to firmly lock the
combination, you may use a
Phillips head screwdriver to
gently counter the Phillips head
screw while holding the bolt with
two fingers.
3.3.7 Only applies to AS
T
F / B
D
SF:
Cover the open hole on
top with the supplied rubber plug.
Repeat 3.2 to 3.3.7 for the two other bolts.
Your Baader Solar Filter is now ready for use.
