12
13
13
3.3.3
Place combination of the three parts to one of the long
holes and make sure that the machined indicator points
parallel toward the index scale. It should not rotate
anymore if the milled surfaces of the slitting fastener are
in the correct position according the long holes of the
white front ring.
(
For AS
T
F / B
D
SF
you can
choose between the inner
and the outer long holes in
order to reach different
clamping areas. Please
check
clamping
range
diagram at Appendix B)
Parallel:
12
3.3 Sliding fastener bolts
3.3.1
Insert M4 Phillips head screw into sliding fastener.
3.3.2
Place black sliding washers in parallel to the milled
surfaces on the lower part of the sliding fastener
