© Baader Planetarium GmbH
17
• The FCCT is designed to carry up to 2 Kg of camera equipment (the larger M68 and
UFC-tilter can take up to 5 Kg of camera total weight).
• The tilter should be positioned close to the camera, to reduce additional loads from
having the camera cantilevered far from the tilter.
FCCT Accessories
For the FCCT, we offer (in addition to spare parts and extensions) three sizes of high-
quality 3D-printed filter drawers that exclusively hold unmounted filters with diameters
of 31 mm / 36 mm and 2" (unmounted diameter = 47.4 mm). Of the unmounted 2"
filters, we offer selected filters for immediate purchase, but any 2" Baader filter will
work when removed from the mount.
Filters smaller than 31 mm very often lead to vignetting in the corners of the image,
even with small chip sizes, and force cropping of the image content.
Available Accessories
• 31 mm filter slider, 3D-printed (single
# 2459087
or set of four
# 2459097
)
• 36 mm filter slider, 3D-printed (single
# 2459088
or set of four
# 2459098
)
• 2" (Ø 47,4 mm) filter slider, 3D-printed (single
# 2459085
or set of four
# 2459095
)
• Adapter kit from FCCT I to FCCT II for QHY 268/294
# 2459075
• 1x Additional 0.5 mm spacer (2 pieces are already included)
# 2459080
• Unmounted 2" (Ø 47,4 mm) L-RGB-C and (Ultra-) Highspeed-Filter especially for the
FCCT can be found in our FCCT category:
www.baader-planetarium.com/fcct
# 2459080
# 2459075
# 2961153U # 2961128U # 2961303U # 2961378U # 2961453U # 2961528U # 2961573U # 2961603RU # 2961603GU # 2961603BU # 2458416U
# 2459087
# 2459088
# 2459085
