background image

Warning

2.1 Installation and connection

•  Please install the product at least 5 cm away from the wall. In addtion, 

do not place any objects above the product. Please keep the product 
away from any heating appliances. Overheating the product may cause 
fire and/or electrocution.

•  Do not block the ventilators on the left, right, and back side of the 

product. Blockage may cause fire and/or breakdown because of rises in 
the inner temperature of the product.

• 

Keep the product at a location away from water. 

• 

Keep the product at a location without excess humidity and temperature.

•  Do not keep the product at a location for chemicals or a location where 

gas is released.

•  Do not keep the product at a sloping location. Do not shake or impact 

the product.

•  Use only AC100-240 V power-supply voltage.  Using the wrong voltage 

input may cause fire and/or electrocution.

• 

Do not place heavy objects on the power cord. Damage to the cord may 
cause fire and/or electrocution. 

•  Do not disassemble this product. Unauthorized disassembly of this 

product may cause electrocution and/or breakdown.

•  Do not damage, bend, twist or pull the power cord. Doing so may cause 

fire and/or electrocution.

•  Ensure earthing of terminal outlet and power socket. Electricity leak in 

the main unit might cause electric shock and/or fire.

•  Pay attention to the frequency of the power supply/power voltage and 

allowable current value (or consumed power.)

2. Safety Information

3

Содержание Cure XL



















Отзывы: