5.1 Instruction for touch panel
5. Functions
1
4
3
2
5
5.2 IDT
(Intensity Duty-Cycle Timer)
settings
•
Intensity Setting
Depending on the strength, thickness, and shape of the material, operator
can set the light intensity from Level 1(lowest) to Level 16(strongest). Intensity
range: 7018 –112295 mW/cm
2
when LED current at 43.8-700mA.
Suggestion: When curing flat and/or thin material, lower the intensity level
with longer timer to optimize the overall strength of the material.
Adjust the light intensity from Level 1 to Level 16.
Adjust the duty cycle (See chapter 5.2) from Level 1 to Level 10
(consistent brightness)
Adjust the working time between 5 seconds - 30 minutes.
Display: Indicate numerical value and remaining seconds.
+ : Increase the level of intensity, duty cycle and working time. Hold and
press the button to fast-forward.
- : Decrease the level of intensity, duty cycle and working time. Hold and
press the button to rewind.
: Start and stop curing
1
1
1
2
3
4
5
8
