b4 Adventure 4010 Holly Street Unit 16 • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS?
[email protected] · www.b4adventure.com 303-339-0482 - DC:080818
7
Figure 3
CORRECT CABLE WRAP - TEAR DROP
INCORRECT - TOO TIGHT!
TREE/
POLE
TREE/
POLE
{
U-Clamp Distance
1 1/2 times tree Diameter
Example: Tree Diameter = 14 In., closest U-Clamp
after final tightening should be 21 In. from the tree
U-shape
thread
U-Clamp
Washer
Thread cover
cap
Third installed
U-Clamp
First installed
U-Clamp
Second installed
U-Clamp
3 In. between bolts
Place thread cover caps on each exposed thread
Course end
of cable
on bottom
• Use your tightening tool to make sure everything is secure
4. TIGHTENING ZIPLINE
• Using the turnbuckle to tighten - inspect your initial installation work carefully and thoroughly. The
zipline cable can hold weight many times that of most riders. The loops, u-clamps and attachment trees
are the most likely to fail if not assembled correctly, and therefore should be inspected extra carefully
and often.
• Tune the zipline by twisting the center section of the turnbuckle to tighten.
• Tighten the line until it appears to be nearly level or straight. DO NOT OVERTIGHTEN
•you can now remove your six small nails used to hold the cables in position during installation.
