B.Well WF-2000, Руководство пользователя

Страница: 10 / 84

WF-2000 Instructions and warranty
The display shows the icon “ ” (HEAD disappears).
3) If you wish to measure the temperature on a precise point,
press the key SCAN.
The thermometer measures the temperature in 0.6 seconds.
If the SCAN key is kept pressed, temperature is updated
continuously.
4) The device switches off automatically after 1 minute, if it is
not used. When it is switched on again, the display shows the
forehead temperature measurement function (HEAD).
CELSIUS/FAHRENHEIT
This thermometer can measure temperature both in Celsius and
Fahrenheit degrees.
Each time you wish to change the measurement unit, proceed as
follows:
1) With switched off thermometer, keep the key SCAN pressed
without releasing it for some seconds, and then press
contemporaneously the key ON/MEM until the displays shows
°F (or °C).
2) The thermometer emits two beeps; at this point, release the
key SCAN and the key ON/MEM.
Now the measurement unit has been changed.
Proceed with the measurement according to paragraph
“INSTRUCTIONS FOR A CORRECT USE”.
MEMORY FUNCTION
This device stores in memory the last 25 measurements performed
to evaluate eventual variations. The measurements are stored auto-
matically after that the thermometer has switched off.
Only forehead temperatures (HEAD) included between 22°C and
42.2°C (71.6°F and 108.0 °F) are stored.
After the first 25 measurements, the oldest data are erased automati-
cally.
To call up saved measurements, switch on the thermometer, and
press the key ON/MEM (Every time the key is pressed, saved data are
All manuals and user guides at all-guides.com