B-TEK Scales TL-280 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 13

B-TEK Scales TL-280 Скачать руководство пользователя страница 13

Page | 13

Additional options

Operator panel Item# 841-500083

The operator panel is a separately offered accessory (additional option) which, among others,
can work with the device. On the panel, there are two monostable buttons that allow you to
change the information displayed by the signalling device. An example of the panel is shown in
Fig. 10

Fig. 10

Disposal and recycling

Packaging material recycling

The packaging elements must be segregated and then recycled in accordance with the local executive

regulations on waste disposal.

Device disposal

The device must not be disposed of as urban waste!
In accordance with the directive 2002/96/EC (WEEE), if the repair of the device is not economically

justified, the user must take the damaged or destroyed equipment to a special waste disposal.

Most common installation errors

1  Invalid configuration uploaded to the light signalling device.
2  Drilling additional mounting holes.
3  Installation not in accordance with the manual, wires facing up.

«
...
11
12
13

Содержание TL-280














Отзывы:

Нет отзывов