Declaration of Conformity According to DIN EN 45014
Manufacturer:
Herewith, we declare that the machines and marketed models described in the following conform in
conception and in design to the relevant fundamental safety and health requirements of the applicable
EU directives.
All of our manufactured or assembled parts conform to the listed regulations.
If you change the machine without our explicit agreement, this declaration will be herewith invalidated.
Product type: Paint-sample dryer
Type designation:
ST-01
Serial-no.:
Construction year: 2015
The following harmonizing standards have been used:
- Safety of machinery, equipment and facilities:
DIN EN ISO 12100 : 2011
- General rules and safety requirements for pneumatic-systems:
DIN EN ISO 4414
Special national norms are applied:
- Safety- and health signs at workplace:
BGV A8
Technical Parameters:
Rated voltage:
120 V
Rated frequency:
60 Hz
Rated power input:
350 W
Protection class:
I
Degree of protection:
IPX0
Tested according to:
EN 60335-1/A2:2006, EN60335-2-30/A2:2007, EN50366/A1:2006
This EC-Attestation of Conformity is issued on a voluntary basis according to the Low Voltage Directive
5006/95/EC relating to electrical equipment designed for use within certain voltage limits. It confirms
that the listed equipment complies with the principal protection requirements of directive.
Responsibility for technical documents: Hans-Joachim Bödrich, Michael Bellroth
Address: Refer to manufacturer’s address
Location/Date/Manufacturer’s signature. :
Function of the signer: Managing director
.................................................................................
B-TEC GmbH
Zunftweg 6-8
D-31303 Burgdorf / Ehlershausen
Hannover, 02.01.2015
