IR-B02 Page 1
equipment and facility engineering
1. Important information
We thank you for your trust you gave to us by buying the infrared emitter "IR-B02". At the rating
plate at your device you will find the exact name and serial-number of your infrared emitter for an
uncomplicated service and shipment of spare parts.
The short- wave infrared Paint Dryer is special for baking finish of automobile, which is featured with
high penetrability, short baking period, long service life, high cost efficiency, convenient and flexible
use without site limit.
The B-TEC device has been built under highest quality standards for high reliability. Because of
certain procedures there are places and parts that can´t be protected without compromising the
usability and function. Therefore we ask you to read this document carefully before using the
machine to reach maximum life and reliable operation.
Read this document carefully before commissioning and keep it for future
reference!
The B-TEC devices and machines are only allowed to be used for the purpose explicitly described
below. Any other use is in contrast with the regulations. The manufacturer cannot be held liable for
damages resulting from such non-regulations use.
Improper use can endanger the health of the operator and of others and cause damage to the
machine itself or to other materials and assets.
The B-TEC machines are only to be used for purpose explicitly described below!
Improper use can endanger the health of the operator!
The manufacturer is not liable for damages caused by changes of the machine
that have not been specifically authorized by the manufacturer. The removal or
alteration of safety devices immediately voids the warranty and is an
infringement of European safety standards.
