Step 2: Lock accessory into position
J-Hook
Electrical Clip
LED Light
Flat Shelf Example
SYSTEM 1224
ADDING ACCESSORIES
GENERAL SCOPE:
System 1224 has a wide range of shelving and
cabinet accessories, available in 24" and 48" wide, and many of
those also come as electrified lit versions. Adding accessories is
made effortless, utilizing the j-hook feature, and hanging from the
upright pins. Install locations are vertically every 6" along the
upright.
RECOMMENDED TOOLS:
No tools needed
STEP 1:
Determine the location of the accessory. Pin locations are
visible in the gap between the panels and front visible edge of the
upright.
STEP 2:
Position the accessory so that the j-hook on the rear of the
accessory lines up with the desired pin. Slide the accessory into the
gap, with the slots of the j-hooks engaging the pins. Push the
accessory down to lock it into place. If the accessory is electrified,
the LED light will automatically turn on.
Note:
Some accessories, like cabinets, use multiple j-hooks to
support the accessory. They are installed in a similar manner.
PAGE
9 of 10
10' UPRIGHT
(FLOOR TO WALL SHOWN)
1
2
3
4
5
650.593.4127
WWW.BNIND.COM
