b-mola BM100, Руководство пользователя

Страница: 14 / 16

10 09
5. ECO Mode
Press the Eco mode button to enter Eco Mode and press once more to exit.
Eco mode is recommended for sleeping time.
7. Filter Installation Alert
If the HEPA filter/NCCO Reactor does not install properly, the display
panel will show
“EE”. The product will not operate and making a warning alarm.
Please reinstall the HEPA filter/NCCO Reactor.
Press the power on/off button and the ECO mode button for 5 seconds to activate the child
lock. You will hear a reminder alarm, the child lock icon appear. Repeat the above steps to exit
Child Lock Mode.
Note: When the child lock is activated, all buttons are not responsive.
6. Child Lock Mode
Operating Instructions
Always unplug the appliance before cleaning or carrying out other
maintenance except replacing filters.
ATTENTION
Cleaning Instructions
1
2
3
4
Cleaning Instructions
Care & Maintenance
WARNING
The product equips with an intelligent protection system. It will stop operating with all indicating
lights off for 30 minutes after 8 hours consecutive operation. The appliance will resume working
automatically after 30 minutes. The user can reactivate the product at any time by pressing the
Power On/Off button.
When the product is left idle for 1 minute, the power button indicator will dim while other indicators
will off.
ATTENTION
Getting Started
■
■
When using chemically treated cloth, be sure to follow the instructions.
Do not leave disassembled parts unattended while performing maintenance.
Do not operate the product without the filter installed, as this may cause irreversible damage to
the NCCO Reactor.
The efficiency of the NCCO Reactor will significantly decline if the HEPA filter does not replace as
indicated in instructions.
■
■
■
■
Cleaning air inlet and outlet
Clean the air inlet and outlet with a soft brush or vacuum
cleaner.
Cleaning pre-filter
Pre-filter is washable.
To optimize the lifespan of the pre-filter, make sure it is air-dried
thoroughly after cleaning.
Never rinse or soak the HEPA filter or NCCO
Reactor with water.
WARNING
Cleaning the body of air purifier
Use a soft, dry cloth to clean the interior and
exterior of the air purifier.
Never use abrasive, aggressive, or flammable cleaning
agents such as bleach or alcohol to clean any part of the
air purifier.
ATTENTION