b-mola BM10, Руководство по эксплуатации

Страница: 15 / 16

1. Filter lifetime will vary depends on environment, amount of usage and location of
the unit.
2. To maintain optimal operating condition of the unit, only use the recommended
filter.
3. Turn off unit but maintain power supply when replacing filters.
4. Please follow HEPA Filter Surface Color Changing Indicator to dispose HEPA Filter.
* The filters cleaning and replacement cycle may vary depending on the operating area.
** If the HEPA Filter has not been replaced periodically, or it has been damaged, the surface of the
NCCO Reactor is covered with dust or oily substances after disassembling, the removal capacity of
the NCCO Reactor may be badly reduced and should be replaced.
Filters
HEPA Filter
NCCO Reactor
Cycle
Every 6 - 12 Months *
Substantial**
Method
Replacement
Substantial
Recommended Filter Cleaning and Replacement Cycles and Methods
No replacement needed
Replacement is
recommended
Replacement is needed
HEPA FILTER SURFACE COLOR CHANGING INDICATOR
Care & Maintenance
Filter Replacement &
Maintenance
Can HEPA Filter be washed with water?
HEPA Filter is made of composite material, water would seriously affect the
purification effect.
Q2
A
The air quality has not improved even after the unit has been turned on for a
long time.
If the unit is used in a severely polluted area, the treatment process will take
longer. It is recommended to use the HIGH FLOW MODE or extend the
operational time until the pollution diminishes.
Q3
A
The unit emits an unusual smell or smog. (e.g. smoke, flame, or burning)
Turn off the unit and disconnect it from power supply right away. Call the customer
service center immediately or contact with a qualified service provider.
Q4
A
Q1
Unit is making 'DiDiDi' sound and not operating.
Please check if filters have been properly installed. If not, please re-install them.
A
Other Intormation
FAQs
12
13